Alright, let’s talk about brick stoppers. I had this little project in mind, something I wanted to do for a while, and it involved some work around the house. Specifically, I needed to fix up a door that wouldn’t stay open on its own. It was a real pain, always swinging shut at the worst times. So I figured, why not make a proper brick stopper?
First thing I did was scout around for some bricks. I didn’t want to buy any, that seemed a bit much. Luckily, I found a few old ones lying around in the backyard. They were a bit dirty, but that’s nothing a good scrub couldn’t fix. So, I grabbed the bricks, hauled them over to the outdoor faucet, and gave them a good wash. I used a stiff brush to really get into the grooves and get all that old grime off.
- Found some old bricks in the backyard.
- Washed the bricks to remove dirt and grime.
- Used a stiff brush for a thorough cleaning.
Once the bricks were clean and dry, I needed to figure out how to make them into a stopper. Just placing a brick in front of the door wasn’t going to cut it. It needed to have some grip and not slide around. So I went to my toolbox and rummaged around for some rubber padding. I found some leftover pieces from an old project, just what I needed! I cut the rubber into strips that would fit the bottom of the bricks.
Next, I needed to attach the rubber to the bricks. I used some heavy-duty glue that I had. I applied a generous amount to the bottom of each brick and pressed the rubber strips onto them. I made sure to apply even pressure so they would stick well. Then, I left them to dry for a good few hours.
The Test
After the glue was completely set, it was time to test my creation. I placed one of the bricks in front of the door, and it worked like a charm! The door stayed open, even with a bit of a breeze. The rubber padding provided just enough grip to keep the brick from sliding on the floor. It was such a simple solution, but it made a huge difference.
I’m pretty happy with how my brick stoppers turned out. They’re functional, they look decent, and they didn’t cost me anything to make. Plus, it was a fun little project to keep me busy on a weekend afternoon. If you’ve got a door that won’t stay open, give this a try. It’s easy, effective, and you might even have all the materials lying around your house already!
